pneumatic rock hammer 063mpa g20 portable air pick hammer rock-0EN
Kategoriji kollha
Ikseb Quote Ħieles
Agħmel kuntatt
Drill tal-blat tar-riġel tal-arja

home /  prodotti /  Drill tal-blat tar-riġel tal-arja

Blat Pnewmatiku Martell 0.63Mpa G20 Portable Air Pick Hammer Rock

Inkjesta issa
  • introduzzjoni
  • Aktar Prodotti
  • Inkjesta

introduzzjoni

The Hongwuhuan G20 is a high-performance, handheld pneumatic pick designed for a variety of rock and concrete breaking operations. It is widely used in mining, construction, and municipal engineering due to its efficient performance, lightweight design, and durability.

Karatteristiċi ewlenin

  • Tkissir ta 'Effiċjenza Għolja: The G20 pneumatic pick uses compressed air to drive the hammer, which moves back and forth to impact the chisel tail, breaking through rock or ore.
  • Ħfief u li jistgħu jinġarru: Weighing only 20 kg with a total length of 485 mm, the G20 is easy to operate and carry.
  • Konsum Baxx tal-Arja: Jopera fi pressjoni ta '0.63 MPa, il-G20 jikkonsma biss 23 litri ta' arja kull sekonda, li jagħmilha kemm ekonomika kif ukoll favur l-ambjent.
  • Enerġija ta 'Impatt Għoli: B'enerġija ta 'impatt ta' ≥60J u frekwenza ta '16Hz, il-G20 jista' jlesti malajr il-kompiti ta 'tkissir.
  • Kostruzzjoni Durabbli: Magħmul b'materjali ta 'kwalità għolja, il-G20 għandu ħajja twila ta' servizz u jnaqqas l-ispiża ta 'sostituzzjonijiet ta' partijiet.

applikazzjonijiet

L-għażla pnewmatika G20 hija adattata għal firxa wiesgħa ta 'xenarji ta' inġinerija, inklużi:
  • Kostruzzjoni Muniċipali: Tkissir u twaqqigħ ta 'pavimenti u ħitan tal-konkrit, qtugħ u tkissir ta' toroq waqt il-kostruzzjoni ta 'awtostradi u pipeline.
  • Operazzjonijiet tal-Minjieri: Coal mining, digging footings, water沟 excavation, and soft rock mining.
  • Siti tal-Kostruzzjoni: Tkissir tal-konkrit, ħamrija ffriżata, u silġ.
  • Industrija Mekkanika: Użat f'applikazzjonijiet li jeħtieġu impatt, bħat-tneħħija u l-installazzjoni ta 'trattur u pinnijiet tal-binarji tat-tank.

manutenzjoni

  1. When assembling the machine, check the clearance between the drill shank and the fixing sleeve. Hold the handle and apply force slowly to ensure normal operation.
  2. Do not insert the entire machine into the ledge when drilling incompetent bed.
  3. If the machine is jammed in a crevice, do not forcibly draw it out as it may damage the machine.
  4. When using the machine, disassemble it at least twice a week, clean it with diesel oil, dry it, oil it, and then reassemble and operate the machine
  5. If the machine should be stored for a long time, disassemble and clean it, oil it, and store it.
Il-pick pnewmatiku Hongwuhuan G20, bil-prestazzjoni eċċellenti u l-kwalità affidabbli tiegħu, sar għodda essenzjali fl-industriji tal-minjieri u tal-kostruzzjoni.
G CS.webp
Inkjesta